And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.261
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.178
And
I accept adding "cowsay" to Additional Software
5.064
And
Additional Software is correctly configured for package "cowsay"
0.760
And
I shutdown Tails and wait for the computer to power off
4.301
And
I start Tails from USB drive "__internal" with network unplugged
39.107
And
I enable persistence
6.430
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.126
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.319
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.094
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.016
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.504
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
22.923
And
I start Tails from USB drive "__internal" with network unplugged
39.135
And
I enable persistence
7.154
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.635
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.243
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.085
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071