And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.072
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.735
And
I accept adding "cowsay" to Additional Software
5.226
And
Additional Software is correctly configured for package "cowsay"
0.643
And
I shutdown Tails and wait for the computer to power off
8.530
And
I start Tails from USB drive "__internal" with network unplugged
38.220
And
I enable persistence
5.692
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
12.253
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.093
And
the network is plugged
0.038
And
available upgrades have been checked
2.222
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.649
And
I can open the Additional Software configuration window from the notification
2.648
And
I shutdown Tails and wait for the computer to power off
17.740
And
I start Tails from USB drive "__internal" with network unplugged
38.920
And
I enable persistence
6.923
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
11.090
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.142
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103