And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.602
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.873
And
I accept adding "cowsay" to Additional Software
3.567
And
Additional Software is correctly configured for package "cowsay"
0.724
And
I shutdown Tails and wait for the computer to power off
8.025
And
I start Tails from USB drive "__internal" with network unplugged
38.093
And
I enable persistence
6.347
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.547
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.018
And
available upgrades have been checked
2.193
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.479
And
I can open the Additional Software configuration window from the notification
2.527
And
I shutdown Tails and wait for the computer to power off
7.984
And
I start Tails from USB drive "__internal" with network unplugged
37.307
And
I enable persistence
6.659
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.343
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.542
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062