And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.042
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.334
And
I accept adding "cowsay" to Additional Software
4.906
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
4.297
And
I start Tails from USB drive "__internal" with network unplugged
38.805
And
I enable persistence
6.915
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
9.999
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.564
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.093
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.022
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.161
And
I can open the Additional Software configuration window from the notification
2.570
And
I shutdown Tails and wait for the computer to power off
17.661
And
I start Tails from USB drive "__internal" with network unplugged
38.276
And
I enable persistence
7.294
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118