And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.366
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.597
And
I accept adding "cowsay" to Additional Software
5.000
And
Additional Software is correctly configured for package "cowsay"
0.815
And
I shutdown Tails and wait for the computer to power off
8.153
And
I start Tails from USB drive "__internal" with network unplugged
38.561
And
I enable persistence
7.017
And
I configure APT to prefer an old version of cowsay
0.056
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
12.233
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.019
And
available upgrades have been checked
2.142
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.497
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
13.634
And
I start Tails from USB drive "__internal" with network unplugged
38.549
And
I enable persistence
5.834
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
11.742
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064