And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.797
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.960
And
I accept adding "cowsay" to Additional Software
5.391
And
Additional Software is correctly configured for package "cowsay"
0.689
And
I shutdown Tails and wait for the computer to power off
4.343
And
I start Tails from USB drive "__internal" with network unplugged
37.613
And
I enable persistence
6.810
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.477
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.021
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.698
And
I can open the Additional Software configuration window from the notification
2.625
And
I shutdown Tails and wait for the computer to power off
17.854
And
I start Tails from USB drive "__internal" with network unplugged
38.178
And
I enable persistence
5.817
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.864
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081