And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.245
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.703
And
I accept adding "cowsay" to Additional Software
5.189
And
Additional Software is correctly configured for package "cowsay"
0.729
And
I shutdown Tails and wait for the computer to power off
7.023
And
I start Tails from USB drive "__internal" with network unplugged
40.716
And
I enable persistence
7.426
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
11.947
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.610
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.029
And
available upgrades have been checked
2.204
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.499
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
17.859
And
I start Tails from USB drive "__internal" with network unplugged
39.427
And
I enable persistence
7.734
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.269
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081