And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.379
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.515
And
I accept adding "cowsay" to Additional Software
4.951
And
Additional Software is correctly configured for package "cowsay"
0.664
And
I shutdown Tails and wait for the computer to power off
8.189
And
I start Tails from USB drive "__internal" with network unplugged
40.458
And
I enable persistence
6.976
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.810
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.654
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.016
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.483
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
13.690
And
I start Tails from USB drive "__internal" with network unplugged
39.124
And
I enable persistence
6.951
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.296
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.250
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075