And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.305
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.938
And
I accept adding "cowsay" to Additional Software
5.236
And
Additional Software is correctly configured for package "cowsay"
0.810
And
I shutdown Tails and wait for the computer to power off
8.226
And
I start Tails from USB drive "__internal" with network unplugged
40.311
And
I enable persistence
7.108
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.226
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.015
And
available upgrades have been checked
1.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.551
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
23.454
And
I start Tails from USB drive "__internal" with network unplugged
38.790
And
I enable persistence
7.195
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.484
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083