And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.346
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.583
And
I accept adding "cowsay" to Additional Software
6.240
And
Additional Software is correctly configured for package "cowsay"
1.050
And
I shutdown Tails and wait for the computer to power off
8.500
And
I start Tails from USB drive "__internal" with network unplugged
40.228
And
I enable persistence
7.469
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
13.217
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.651
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.023
And
available upgrades have been checked
2.340
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.063
And
I can open the Additional Software configuration window from the notification
2.660
And
I shutdown Tails and wait for the computer to power off
22.742
And
I start Tails from USB drive "__internal" with network unplugged
40.577
And
I enable persistence
6.774
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
11.783
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.242
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063