And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.194
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.808
And
I accept adding "cowsay" to Additional Software
3.693
And
Additional Software is correctly configured for package "cowsay"
0.717
And
I shutdown Tails and wait for the computer to power off
8.078
And
I start Tails from USB drive "__internal" with network unplugged
35.809
And
I enable persistence
6.286
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.291
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.022
And
available upgrades have been checked
1.087
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.521
And
I can open the Additional Software configuration window from the notification
2.534
And
I shutdown Tails and wait for the computer to power off
17.075
And
I start Tails from USB drive "__internal" with network unplugged
35.863
And
I enable persistence
6.620
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
8.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098