And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.146
And
I configure APT to prefer an old version of cowsay
0.041
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
11.528
And
I accept adding "cowsay" to Additional Software
5.530
And
Additional Software is correctly configured for package "cowsay"
0.847
And
I shutdown Tails and wait for the computer to power off
7.755
And
I start Tails from USB drive "__internal" with network unplugged
43.465
And
I enable persistence
9.087
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.072
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.603
And
I can open the Additional Software configuration window from the notification
2.770
And
I shutdown Tails and wait for the computer to power off
2:3.428
And
I start Tails from USB drive "__internal" with network unplugged
42.893
And
I enable persistence
8.413
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.291
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.248
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.069
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.101