And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.688
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.743
And
I accept adding "cowsay" to Additional Software
3.641
And
Additional Software is correctly configured for package "cowsay"
0.854
And
I shutdown Tails and wait for the computer to power off
8.480
And
I start Tails from USB drive "__internal" with network unplugged
37.210
And
I enable persistence
6.751
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
11.826
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.023
And
available upgrades have been checked
2.227
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.068
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
2.740
And
I start Tails from USB drive "__internal" with network unplugged
37.215
And
I enable persistence
6.621
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
11.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060