And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.467
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.626
And
I accept adding "cowsay" to Additional Software
4.888
And
Additional Software is correctly configured for package "cowsay"
0.610
And
I shutdown Tails and wait for the computer to power off
8.257
And
I start Tails from USB drive "__internal" with network unplugged
36.920
And
I enable persistence
6.686
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.411
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.019
And
available upgrades have been checked
3.248
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.529
And
I can open the Additional Software configuration window from the notification
2.584
And
I shutdown Tails and wait for the computer to power off
17.386
And
I start Tails from USB drive "__internal" with network unplugged
37.109
And
I enable persistence
6.933
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
9.113
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049