And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.377
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.414
And
I accept adding "cowsay" to Additional Software
5.139
And
Additional Software is correctly configured for package "cowsay"
0.710
And
I shutdown Tails and wait for the computer to power off
8.058
And
I start Tails from USB drive "__internal" with network unplugged
37.455
And
I enable persistence
5.437
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.282
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.021
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.980
And
I can open the Additional Software configuration window from the notification
2.625
And
I shutdown Tails and wait for the computer to power off
22.675
And
I start Tails from USB drive "__internal" with network unplugged
37.027
And
I enable persistence
6.655
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.436
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.593
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053