And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.693
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.965
And
I accept adding "cowsay" to Additional Software
5.062
And
Additional Software is correctly configured for package "cowsay"
0.723
And
I shutdown Tails and wait for the computer to power off
8.213
And
I start Tails from USB drive "__internal" with network unplugged
39.098
And
I enable persistence
5.660
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
10.270
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.016
And
available upgrades have been checked
2.176
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.499
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
13.637
And
I start Tails from USB drive "__internal" with network unplugged
37.156
And
I enable persistence
6.788
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.669
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.286
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.073
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.114