And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.489
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.639
And
I accept adding "cowsay" to Additional Software
3.791
And
Additional Software is correctly configured for package "cowsay"
0.619
And
I shutdown Tails and wait for the computer to power off
4.138
And
I start Tails from USB drive "__internal" with network unplugged
35.994
And
I enable persistence
5.431
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
10.565
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.018
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.526
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
18.569
And
I start Tails from USB drive "__internal" with network unplugged
35.015
And
I enable persistence
5.462
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.276
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.085
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058