And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.304
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.366
And
I accept adding "cowsay" to Additional Software
5.259
And
Additional Software is correctly configured for package "cowsay"
0.691
And
I shutdown Tails and wait for the computer to power off
8.029
And
I start Tails from USB drive "__internal" with network unplugged
38.047
And
I enable persistence
6.929
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
11.756
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.302
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.030
And
available upgrades have been checked
2.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.493
And
I can open the Additional Software configuration window from the notification
2.534
And
I shutdown Tails and wait for the computer to power off
12.569
And
I start Tails from USB drive "__internal" with network unplugged
38.806
And
I enable persistence
6.788
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
12.564
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051