And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.991
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.429
And
I accept adding "cowsay" to Additional Software
3.732
And
Additional Software is correctly configured for package "cowsay"
0.664
And
I shutdown Tails and wait for the computer to power off
4.144
And
I start Tails from USB drive "__internal" with network unplugged
36.914
And
I enable persistence
6.609
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.044
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.549
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.014
And
available upgrades have been checked
1.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.053
And
I can open the Additional Software configuration window from the notification
2.620
And
I shutdown Tails and wait for the computer to power off
13.285
And
I start Tails from USB drive "__internal" with network unplugged
37.307
And
I enable persistence
7.183
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.207
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.271
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.044
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062