And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.491
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.203
And
I accept adding "cowsay" to Additional Software
5.475
And
Additional Software is correctly configured for package "cowsay"
0.792
And
I shutdown Tails and wait for the computer to power off
7.862
And
I start Tails from USB drive "__internal" with network unplugged
43.073
And
I enable persistence
8.287
And
I configure APT to prefer an old version of cowsay
0.037
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.986
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.286
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.177
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.691
And
I can open the Additional Software configuration window from the notification
2.738
And
I shutdown Tails and wait for the computer to power off
23.096
And
I start Tails from USB drive "__internal" with network unplugged
43.325
And
I enable persistence
7.784
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
12.886
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.619
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096