And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.797
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.502
And
I accept adding "cowsay" to Additional Software
6.129
And
Additional Software is correctly configured for package "cowsay"
0.631
And
I shutdown Tails and wait for the computer to power off
4.137
And
I start Tails from USB drive "__internal" with network unplugged
37.773
And
I enable persistence
7.028
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
10.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.313
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.017
And
available upgrades have been checked
0.074
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.514
And
I can open the Additional Software configuration window from the notification
2.666
And
I shutdown Tails and wait for the computer to power off
23.065
And
I start Tails from USB drive "__internal" with network unplugged
38.336
And
I enable persistence
6.542
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.722
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.079
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059