And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.355
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.882
And
I accept adding "cowsay" to Additional Software
3.919
And
Additional Software is correctly configured for package "cowsay"
0.837
And
I shutdown Tails and wait for the computer to power off
7.513
And
I start Tails from USB drive "__internal" with network unplugged
41.391
And
I enable persistence
7.517
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
11.664
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.603
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.081
And
available upgrades have been checked
1.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.226
And
I can open the Additional Software configuration window from the notification
2.685
And
I shutdown Tails and wait for the computer to power off
17.961
And
I start Tails from USB drive "__internal" with network unplugged
41.517
And
I enable persistence
7.760
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
11.993
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076