And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.650
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.839
And
I accept adding "cowsay" to Additional Software
5.481
And
Additional Software is correctly configured for package "cowsay"
0.664
And
I shutdown Tails and wait for the computer to power off
3.148
And
I start Tails from USB drive "__internal" with network unplugged
41.411
And
I enable persistence
7.619
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
12.689
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.053
And
available upgrades have been checked
0.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.411
And
I can open the Additional Software configuration window from the notification
2.733
And
I shutdown Tails and wait for the computer to power off
17.899
And
I start Tails from USB drive "__internal" with network unplugged
41.534
And
I enable persistence
7.321
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
12.292
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.078
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107