And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.128
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.869
And
I accept adding "cowsay" to Additional Software
5.632
And
Additional Software is correctly configured for package "cowsay"
1.009
And
I shutdown Tails and wait for the computer to power off
4.830
And
I start Tails from USB drive "__internal" with network unplugged
43.103
And
I enable persistence
7.777
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
13.442
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.295
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.097
And
I prepare the Additional Software upgrade process to fail
0.081
And
the network is plugged
0.056
And
available upgrades have been checked
0.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.801
And
I can open the Additional Software configuration window from the notification
3.026
And
I shutdown Tails and wait for the computer to power off
2:3.004
And
I start Tails from USB drive "__internal" with network unplugged
43.072
And
I enable persistence
8.459
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.474
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072