And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.282
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.676
And
I accept adding "cowsay" to Additional Software
5.038
And
Additional Software is correctly configured for package "cowsay"
0.665
And
I shutdown Tails and wait for the computer to power off
4.086
And
I start Tails from USB drive "__internal" with network unplugged
38.827
And
I enable persistence
7.106
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.244
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.583
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.021
And
available upgrades have been checked
1.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.011
And
I can open the Additional Software configuration window from the notification
2.595
And
I shutdown Tails and wait for the computer to power off
17.717
And
I start Tails from USB drive "__internal" with network unplugged
38.799
And
I enable persistence
6.652
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.956
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059