And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:42.026
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.600
And
I accept adding "cowsay" to Additional Software
7.512
And
Additional Software is correctly configured for package "cowsay"
0.873
And
I shutdown Tails and wait for the computer to power off
7.777
And
I start Tails from USB drive "__internal" with network unplugged
48.614
And
I enable persistence
9.073
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
14.460
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.415
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.072
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.626
And
I can open the Additional Software configuration window from the notification
3.468
And
I shutdown Tails and wait for the computer to power off
17.704
And
I start Tails from USB drive "__internal" with network unplugged
46.934
And
I enable persistence
9.260
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.247
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.417
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107