And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.542
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.671
And
I accept adding "cowsay" to Additional Software
3.603
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
7.914
And
I start Tails from USB drive "__internal" with network unplugged
35.163
And
I enable persistence
5.636
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
8.556
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.623
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.026
And
available upgrades have been checked
2.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.497
And
I can open the Additional Software configuration window from the notification
2.515
And
I shutdown Tails and wait for the computer to power off
17.013
And
I start Tails from USB drive "__internal" with network unplugged
36.019
And
I enable persistence
5.480
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.775
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067