And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.274
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.106
And
I accept adding "cowsay" to Additional Software
6.311
And
Additional Software is correctly configured for package "cowsay"
0.807
And
I shutdown Tails and wait for the computer to power off
4.095
And
I start Tails from USB drive "__internal" with network unplugged
40.051
And
I enable persistence
7.354
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
11.846
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.423
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.025
And
available upgrades have been checked
2.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.013
And
I can open the Additional Software configuration window from the notification
2.983
And
I shutdown Tails and wait for the computer to power off
22.636
And
I start Tails from USB drive "__internal" with network unplugged
39.391
And
I enable persistence
6.933
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.905
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.298
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096