And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.270
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.595
And
I accept adding "cowsay" to Additional Software
4.930
And
Additional Software is correctly configured for package "cowsay"
0.720
And
I shutdown Tails and wait for the computer to power off
8.272
And
I start Tails from USB drive "__internal" with network unplugged
35.891
And
I enable persistence
5.949
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.274
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.345
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.038
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.949
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
22.463
And
I start Tails from USB drive "__internal" with network unplugged
35.955
And
I enable persistence
5.935
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.580
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.337
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.123
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059