And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.988
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.644
And
I accept adding "cowsay" to Additional Software
4.973
And
Additional Software is correctly configured for package "cowsay"
0.673
And
I shutdown Tails and wait for the computer to power off
7.352
And
I start Tails from USB drive "__internal" with network unplugged
38.835
And
I enable persistence
6.656
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.916
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.015
And
available upgrades have been checked
2.207
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.010
And
I can open the Additional Software configuration window from the notification
2.539
And
I shutdown Tails and wait for the computer to power off
13.631
And
I start Tails from USB drive "__internal" with network unplugged
39.019
And
I enable persistence
7.994
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
11.963
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.408
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.156