And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.608
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.398
And
I accept adding "cowsay" to Additional Software
4.844
And
Additional Software is correctly configured for package "cowsay"
0.629
And
I shutdown Tails and wait for the computer to power off
7.999
And
I start Tails from USB drive "__internal" with network unplugged
39.509
And
I enable persistence
6.717
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.203
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.491
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.017
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.498
And
I can open the Additional Software configuration window from the notification
2.598
And
I shutdown Tails and wait for the computer to power off
22.685
And
I start Tails from USB drive "__internal" with network unplugged
37.558
And
I enable persistence
6.839
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.801
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.123
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067