And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.360
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.955
And
I accept adding "cowsay" to Additional Software
3.810
And
Additional Software is correctly configured for package "cowsay"
0.942
And
I shutdown Tails and wait for the computer to power off
8.600
And
I start Tails from USB drive "__internal" with network unplugged
37.525
And
I enable persistence
5.878
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.368
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.024
And
available upgrades have been checked
0.085
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.118
And
I can open the Additional Software configuration window from the notification
2.496
And
I shutdown Tails and wait for the computer to power off
22.706
And
I start Tails from USB drive "__internal" with network unplugged
37.740
And
I enable persistence
6.611
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.417
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064