And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.069
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.435
And
I accept adding "cowsay" to Additional Software
5.182
And
Additional Software is correctly configured for package "cowsay"
0.767
And
I shutdown Tails and wait for the computer to power off
8.286
And
I start Tails from USB drive "__internal" with network unplugged
38.613
And
I enable persistence
6.779
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.976
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.331
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.014
And
available upgrades have been checked
2.204
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.531
And
I can open the Additional Software configuration window from the notification
2.647
And
I shutdown Tails and wait for the computer to power off
17.844
And
I start Tails from USB drive "__internal" with network unplugged
38.484
And
I enable persistence
6.931
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.270
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.755
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066