And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.907
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.436
And
I accept adding "cowsay" to Additional Software
4.932
And
Additional Software is correctly configured for package "cowsay"
0.729
And
I shutdown Tails and wait for the computer to power off
8.058
And
I start Tails from USB drive "__internal" with network unplugged
37.248
And
I enable persistence
7.005
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.572
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.448
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.097
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.014
And
available upgrades have been checked
3.181
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.566
And
I can open the Additional Software configuration window from the notification
2.676
And
I shutdown Tails and wait for the computer to power off
17.532
And
I start Tails from USB drive "__internal" with network unplugged
37.335
And
I enable persistence
6.582
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
11.023
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.357
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.123
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109