And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.662
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.380
And
I accept adding "cowsay" to Additional Software
3.628
And
Additional Software is correctly configured for package "cowsay"
0.562
And
I shutdown Tails and wait for the computer to power off
4.252
And
I start Tails from USB drive "__internal" with network unplugged
36.338
And
I enable persistence
7.060
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.490
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.329
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.014
And
available upgrades have been checked
1.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.579
And
I can open the Additional Software configuration window from the notification
2.597
And
I shutdown Tails and wait for the computer to power off
17.183
And
I start Tails from USB drive "__internal" with network unplugged
36.522
And
I enable persistence
6.318
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.448
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.382
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069