And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.071
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.504
And
I accept adding "cowsay" to Additional Software
4.886
And
Additional Software is correctly configured for package "cowsay"
0.675
And
I shutdown Tails and wait for the computer to power off
7.274
And
I start Tails from USB drive "__internal" with network unplugged
37.389
And
I enable persistence
6.982
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.016
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.058
And
I can open the Additional Software configuration window from the notification
2.612
And
I shutdown Tails and wait for the computer to power off
17.932
And
I start Tails from USB drive "__internal" with network unplugged
38.234
And
I enable persistence
6.592
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.737
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.780
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061