And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.396
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.189
And
I accept adding "cowsay" to Additional Software
5.022
And
Additional Software is correctly configured for package "cowsay"
0.796
And
I shutdown Tails and wait for the computer to power off
4.030
And
I start Tails from USB drive "__internal" with network unplugged
34.793
And
I enable persistence
5.767
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.655
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.303
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.018
And
available upgrades have been checked
2.146
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.420
And
I can open the Additional Software configuration window from the notification
2.642
And
I shutdown Tails and wait for the computer to power off
22.131
And
I start Tails from USB drive "__internal" with network unplugged
35.606
And
I enable persistence
5.797
And
I configure APT to prefer an old version of cowsay
0.033
And
I log in to a new session
9.025
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.347
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050