And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.587
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.207
And
I accept adding "cowsay" to Additional Software
3.761
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
7.750
And
I start Tails from USB drive "__internal" with network unplugged
34.849
And
I enable persistence
5.250
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
8.980
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.404
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.012
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.452
And
I can open the Additional Software configuration window from the notification
2.527
And
I shutdown Tails and wait for the computer to power off
17.147
And
I start Tails from USB drive "__internal" with network unplugged
34.836
And
I enable persistence
5.381
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
8.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.281
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.100
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052