And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.603
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.766
And
I accept adding "cowsay" to Additional Software
5.131
And
Additional Software is correctly configured for package "cowsay"
0.882
And
I shutdown Tails and wait for the computer to power off
8.509
And
I start Tails from USB drive "__internal" with network unplugged
38.215
And
I enable persistence
6.744
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
11.718
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.454
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.015
And
available upgrades have been checked
2.190
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.162
And
I can open the Additional Software configuration window from the notification
2.646
And
I shutdown Tails and wait for the computer to power off
12.700
And
I start Tails from USB drive "__internal" with network unplugged
38.073
And
I enable persistence
5.559
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
11.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.718
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061