And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.398
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.655
And
I accept adding "cowsay" to Additional Software
3.705
And
Additional Software is correctly configured for package "cowsay"
0.629
And
I shutdown Tails and wait for the computer to power off
8.024
And
I start Tails from USB drive "__internal" with network unplugged
38.236
And
I enable persistence
6.494
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.631
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.341
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.018
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.551
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
17.159
And
I start Tails from USB drive "__internal" with network unplugged
37.317
And
I enable persistence
5.741
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.471
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.418
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.135
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048