And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.975
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.212
And
I accept adding "cowsay" to Additional Software
3.961
And
Additional Software is correctly configured for package "cowsay"
0.629
And
I shutdown Tails and wait for the computer to power off
7.979
And
I start Tails from USB drive "__internal" with network unplugged
36.021
And
I enable persistence
5.519
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.016
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.343
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.015
And
available upgrades have been checked
2.163
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.538
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.187
And
I start Tails from USB drive "__internal" with network unplugged
36.241
And
I enable persistence
6.453
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
8.935
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.290
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067