And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.594
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.830
And
I accept adding "cowsay" to Additional Software
4.929
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
5.530
And
I start Tails from USB drive "__internal" with network unplugged
38.161
And
I enable persistence
6.630
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
11.961
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.325
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.038
And
available upgrades have been checked
3.277
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.511
And
I can open the Additional Software configuration window from the notification
2.683
And
I shutdown Tails and wait for the computer to power off
12.314
And
I start Tails from USB drive "__internal" with network unplugged
36.895
And
I enable persistence
5.625
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.877
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.422
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.137