And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.906
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.717
And
I accept adding "cowsay" to Additional Software
5.008
And
Additional Software is correctly configured for package "cowsay"
1.031
And
I shutdown Tails and wait for the computer to power off
8.340
And
I start Tails from USB drive "__internal" with network unplugged
39.192
And
I enable persistence
5.499
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
12.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.452
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.016
And
available upgrades have been checked
2.213
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.087
And
I can open the Additional Software configuration window from the notification
2.542
And
I shutdown Tails and wait for the computer to power off
17.614
And
I start Tails from USB drive "__internal" with network unplugged
39.264
And
I enable persistence
7.181
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.998
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.312
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056