And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.920
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.245
And
I accept adding "cowsay" to Additional Software
3.727
And
Additional Software is correctly configured for package "cowsay"
0.705
And
I shutdown Tails and wait for the computer to power off
7.114
And
I start Tails from USB drive "__internal" with network unplugged
37.140
And
I enable persistence
6.665
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.011
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.441
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.015
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.061
And
I can open the Additional Software configuration window from the notification
2.577
And
I shutdown Tails and wait for the computer to power off
17.346
And
I start Tails from USB drive "__internal" with network unplugged
37.312
And
I enable persistence
5.894
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.698
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.346
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059