And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.903
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.674
And
I accept adding "cowsay" to Additional Software
3.623
And
Additional Software is correctly configured for package "cowsay"
0.554
And
I shutdown Tails and wait for the computer to power off
4.174
And
I start Tails from USB drive "__internal" with network unplugged
35.550
And
I enable persistence
5.329
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.280
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.649
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.013
And
available upgrades have been checked
1.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.505
And
I can open the Additional Software configuration window from the notification
2.552
And
I shutdown Tails and wait for the computer to power off
13.054
And
I start Tails from USB drive "__internal" with network unplugged
34.950
And
I enable persistence
5.566
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.178
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.359
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060