And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.891
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.159
And
I accept adding "cowsay" to Additional Software
4.888
And
Additional Software is correctly configured for package "cowsay"
0.814
And
I shutdown Tails and wait for the computer to power off
8.553
And
I start Tails from USB drive "__internal" with network unplugged
39.795
And
I enable persistence
7.037
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
12.054
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.424
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.039
And
available upgrades have been checked
2.218
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.978
And
I can open the Additional Software configuration window from the notification
2.599
And
I shutdown Tails and wait for the computer to power off
12.660
And
I start Tails from USB drive "__internal" with network unplugged
39.492
And
I enable persistence
6.954
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.880
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.370
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.155
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063