And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.219
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.376
And
I accept adding "cowsay" to Additional Software
4.966
And
Additional Software is correctly configured for package "cowsay"
0.709
And
I shutdown Tails and wait for the computer to power off
8.249
And
I start Tails from USB drive "__internal" with network unplugged
37.788
And
I enable persistence
6.711
And
I configure APT to prefer an old version of cowsay
0.016
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.803
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.425
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.021
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.534
And
I can open the Additional Software configuration window from the notification
2.574
And
I shutdown Tails and wait for the computer to power off
17.761
And
I start Tails from USB drive "__internal" with network unplugged
37.776
And
I enable persistence
5.577
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.413
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.383
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083