And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.301
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.214
And
I accept adding "cowsay" to Additional Software
4.952
And
Additional Software is correctly configured for package "cowsay"
0.617
And
I shutdown Tails and wait for the computer to power off
4.084
And
I start Tails from USB drive "__internal" with network unplugged
39.704
And
I enable persistence
7.670
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
10.310
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.019
And
available upgrades have been checked
2.199
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.165
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
13.817
And
I start Tails from USB drive "__internal" with network unplugged
40.311
And
I enable persistence
7.574
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
10.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.399
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062