And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.562
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.882
And
I accept adding "cowsay" to Additional Software
3.636
And
Additional Software is correctly configured for package "cowsay"
0.586
And
I shutdown Tails and wait for the computer to power off
7.845
And
I start Tails from USB drive "__internal" with network unplugged
35.547
And
I enable persistence
5.701
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
10.032
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.277
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.015
And
available upgrades have been checked
2.159
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.480
And
I can open the Additional Software configuration window from the notification
2.625
And
I shutdown Tails and wait for the computer to power off
13.022
And
I start Tails from USB drive "__internal" with network unplugged
34.784
And
I enable persistence
5.577
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.268
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.146
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050