And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.552
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.011
And
I accept adding "cowsay" to Additional Software
3.774
And
Additional Software is correctly configured for package "cowsay"
0.526
And
I shutdown Tails and wait for the computer to power off
7.970
And
I start Tails from USB drive "__internal" with network unplugged
37.154
And
I enable persistence
7.028
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
10.223
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.319
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.016
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.130
And
I can open the Additional Software configuration window from the notification
2.609
And
I shutdown Tails and wait for the computer to power off
17.782
And
I start Tails from USB drive "__internal" with network unplugged
36.899
And
I enable persistence
7.405
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
10.069
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.466
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058